A joint task force between the Federal Highway Administration and American Association of State Highway Transportation Officials conducted a study of over 1200 auto accidents across the United States involving serious harm or loss of life despite the presence of guardrails. Their report not only concluded a particular make and model of guardrail end terminal to be defective but a significant portion of end terminals were also installed incorrectly. In light of this report, the Minnesota Department of Transportation (MnDOT) commissioned Continental Mapping to complete a statewide inventory of end terminals along its roadways to locate, inspect, identify and replace the infringing assets. The Barrier End Terminal Inventory and Assessment (BETIA) original project scope defined 6 end terminal related assets. MnDOT wished to capitalize on the effort by compiling a comprehensive inventory of 13 additional transportation assets within its right-of-way to support other business needs.


Minnesota Statewide Asset Inventory & Assessment


Minnesota Department of Transportation

Scope of Assets for Inventory

  • End Terminals
  • Longitudinal Metal Barriers
  • Transitions
  • Cable Barriers
  • Cable Anchors
  • Crash Cushions
  • Signs
  • LRS Centerline
  • Edge of Pavement
  • Paint Striping
  • Rumble Strips
  • Concrete Barriers
  • Light Poles
  • Traffic Signals
  • Overhead Sign Clearances
  • Bridge Clearances
  • Utility Line Clearances
  • Catch Basins
  • Reference Markers (Mile Markers)

    MnDOT selected Continental Mapping to design a database for the desired asset information, develop operations and maintenance documentation for long term maintenance, map all assets, field inspect all end terminals, and report back all findings to MnDOT. Continental Mapping devised a workflow for collection that utilized mobile lidar acquisition, field survey assessment, and proprietary software to optimize the processing, validation, and distribution of data to MnDOT.

    Continental Mapping acquired 15,000+ centerline miles of street level imagery and lidar across MN roadways. To date 47,678 safety assets (including 15,500 end terminals) have been collected, identified, extracted, and mapped. Project status and the resulting geospatial data was disseminated to MnDOT through TheGeoAnalyst™, Continental Mapping’s cloud-based project status and 3D data hosting solution.

    Lidar and imagery collected for the BETIA project as viewed through TheGeoAnalyst web-based viewer.

    Locations of over 15,000 barrier end treatments throughout the state. Their conditions were assessed and cataloged for MnDOT review.

    Continental Mapping vehicle-mounted Maverick next to "Welcome to Minnesota" sign at Minnesota border


    • MnDOT is now proactively maintaining a single, standardized asset inventory
    • MnDOT can more accurately direct maintenance crews to the location of its assets for repair and replacement
    • MnDOT is now pushing for higher installation standards with contractors
    • MnDOT’s asset inventory can be easily shared with other departments through TheGeoAnalyst