Continental Mapping provided photogrammetry and aerial lidar to support pavement analysis at Fort Hood, Texas.
Under its Indefinite Quantity, Indefinite Delivery (IDIQ) contract held through the US Army Corps of Engineers Fort Worth District, Continental Mapping was tasked with performing field topographic, planimetric, and utility surveys of South Range Road and Ammo Road in Ft. Hood Texas. Continental Mapping also performed office computations and 3D digital mapping for use in developing plans and specifications for the two roads. A primary focus of this project was the considerable damage caused to the road by heavy military equipment, and it was the understanding of Continental Mapping that issues like alligator cracking were of significance to project engineers at Fort Hood.
To meet engineering needs, Continental Mapping proposed aerial lidar and imagery that was tied in with a detailed land survey plan. Within the survey deliverables were locations of all underground utility assets obtained through Subsurface Utility Engineering (SUE) survey practices.
Continental Mapping worked with the Fort to establish a coordinated flight plan that would not interfere with the Fort’s congested air traffic. The period of performance was 54 calendar days.
- Draft Work, Quality Control, and Safety Plans
- Meeting Minutes
- Government comments of Minutes
- Final Work, Quality Control, and Final Safety Plans
- Ammo Road Draft Survey for review
- South Range Road Draft Survey for review
- Government Review Period Drafts
- Final Survey
- Government Back-Check final
- Final Back-Check Submittal
Photogrammetry and Aerial Lidar at Fort Hood, TX
US Army Corps of Engineers Fort Worth District